|Optimize development of new polymer formulations with the Thermo Scientific™ Process 11 Parallel Twin-Screw Benchtop Extruder. We offer many extrusion solutions for novel materials.
The Process 11 parallel co-rotating extruder needs only a small amount of material (20 grams per hour) to conduct experiments, so you can run numerous trials with great efficiency. And it scales up to 2.5 kilograms of material per hour so you can easily mimic final production and conduct scale-up quickly and with confidence.
Customize the Process 11 extruder for your specific applications with a broad range of accessories such as the water bath, Pelletizer, or our new sheet die and chilled sheet take-off to help simulate full scale production.
Test specimen production
Create ISO/ASTM-compliant test specimens in process development after compounding tiny samples in the R&D lab with the Thermo Scientific™ HAAKE™ MiniJet Pro Injection Molding System. Ease the worries of limited material quantities and produce various sample geometries with the HAAKE MiniJet Pro Sample Preparation system.
You may also be interested in:
Featured application note:
Relevant Process Parameters for Upscaling in Twin-screw Compounding.
|Key products video:
Small scale twin-screw compounding with the 11mm twin screw extruder, Process 11 extruder, combined with the HAAKE MiniJet laboratory injection molding system.
Twin-screw extruders: Brochure for comprehensive compounding and extrusion solutions in materials science
Learn more about the Process 11 Extruder and HAAKE MiniJet Pro Injection Molding System.
| For Research Use Only. Not for use in diagnostic procedures.
5805 Kennedy Rd., Mississauga ON, L4Z 2G3 | TEL: 905 890 2010 – FAX: 905 890 1959
Integrys Limited, ACA TMetrix Inc. and Spectra Research Corp, are subsidiary companies of The ACA Group of Companies
Copyright © 2016 Spectra Research Corporation. All Rights Reserved.