Technologies

Mixing Diamond Interaction Chamber (DIXC) is a chamber specially designed for mixing and homogenizing the sample fluids from two or more inlet ports. The multiple streams will mix homogenously at the diamond mixing chamber where the fluids pass through the fixed micro-channels and experience high shears and strong impacts.

The HandExtruder is a manually powered extruder designed for the formulation of 0.25mL-2.0mL liposome and lipopolyplex with small samples. The sample is passed back through the membrane by being pushed back and forth between two syringes. Homogeneous samples can be produced quickly and easily in minutes; typically 5-10 passes are sufficient to produce a sample with uniform liposome size. The HandExtruder offers minimal dead-volume, is easy to clean and is suitable for sterilization. Temperature control is available

Genizer Multi Online Liposome Extruders System can be connected with a sanitary pump or high pressure homogenizer and are temperature-controlled, from pilot testing to manufacturing production of pharmaceutical liposomes such as anti-cancer drugs. Homogenous samples can be produced quickly and easily in minutes; typically 3-5 passes are sufficient to produce a sample with uniform liposome size. The Genizer Multi Online Liposome Extruders System is designed to generate homogeneous unilamellar liposomes and lipopolyplex. Extrusion is a one-step procedure that produces liposomes by forcing lipid suspensions of drug, protein or gene through track-etched filters of defined pore size. The Multi Online Extruders System offers minimal dead volume, is easy to clean, suitable for sterilization and compliant with FDA and GMP sanitary standards in pharmaceuticals.

The Genizer Jacketed Liposome Extruders is compressed air-driven and temperature-controlled, from testing to manufacturing production of liposome and lipopolyplex, for drug and gene delivery. Homogeneous samples can be produced quickly and easily in minutes; typically 5-10 passes are sufficient to produce a sample with uniform liposome size. Genizer Jacketed Liposome Extruders are designed to generate homogeneous unilamellar liposomes and Lipopolyplex. Extrusion is a one-step procedure that produces liposomes by forcing lipid suspensions of drug, protein or gene through track-etched filters of defined pore size. The process is relatively gentle, exposing the formulation to moderate pressures up to 500 psi at controlled temperatures. The Genizer Jacketed Extruder offers virtually no dead-volume, is easy to clean, suitable for sterilization and in compliance with FDA and GMP sanitary standards in pharmaceuticals.

• Form deviation from 3D CAD models
• Calibration of surface texture measuring instruments
• Sub-micron height repeatability over entire extended area
• One shot height measurement up to 40 mm without Z scanning
• Bi-telecentric lenses with very low field distortion providing accurate metrology

Simply powerful

• Sample Navigation – An overview tool helps the user to inspect the sample during measurement preparation
• Auto 3D Function – the SensoSCAN software automatically
• Analysis & Reporting – It is also possible to create analysis templates
• Automating procedures module – Automated measurements are obtained using the Recipes tool
• Extended measurements module – Allows the user to easily define the measurement layout on the surface by means of the overview image

• Complete accessibility
• Cover a wide range of scales
• Maximum versatility
• A complete 3D measurement
• Measure angles greater than 90º
• Measurements without limitation
• Accurate and reliable

• Flexible. Powerful.
• 3D auto function
• Live image options
• Designed to be
• simple and easy to use
• It is time to play. . .
• uses premium CF60-2 Nikon objectives
• Obtain a clear and well-structured report
• Adaptable column – Flexible options are designed to avoid restrictions between samples with differing heights.

• Integrable metrology solutions
• Robust, rugged and reliable
• Versatile or fast
• Maximum measurement versatility
• Unprecedented high speed
• Compact, light and orientation agnostic

• Powerful Analysis Software
• 3D exportable in multiple formats
• Simple yet powerful, designed for you
• Smart calculations tool for key parameters
• The most perceptive visualization of your topographies
• Customizable reports for more flexible results presentations

• Easy to use
• Completely modularly adaptable to customer requirements
• Two levels (standard and premium) and several modules are available
• Digital Surf, is an extremely powerful tool for analysis nad reporting

Rapid Quality Control

• Guide tool for the QC manager
• Extremely fast
• Command line available
• Parameter statistical analysis module
• Exportable reports in multiple formats
• Automatized custom analysis solutions

• Filament Extruder X 1EA
• Hot-Melting Pneumatic Dispense X 1EA
• -4-60°C (cooling/heating)
• Ultrasonic Sensor + 1OOTPI Fine Adjust Screw I Fork Sensor
• 720p HD Camera
• C02 Incubator (C02 5%, 37°C, Humidity 80%)
• Syringe Pneumatic Dispense X 5EA + NFC Tagging System 1EA

The freedom to develop your own process

• Dedicated to R&D development, the C100 LAB opens opportunities to​
• Develop materials with a low quantity of material
• Qualify design
• Print parts to show case
• User friendly
• Open parameters
• Stereolithography laser
• Free link support technology
• Controlled quantity of printed ceramic slurry
• Accessible for persons with reduced mobility
• Start a printing run with only 60 mL of ceramic formulation
• Cartridge of 180 mL, 360 mL, 600 mL or 920 mL available)
• Option : Pressure tank (1,5 L)

FOR SMALL SERIE AND PROTOTYPING

• 3 sizes of building platform : 100 x 300 mm, 200 x 300 mm and 300 x 300 mm
• First printer developed by 3DCeram, the C900
• FLEX gets the benefits of 15 years of know-how and optimization
• Print functional parts or small series
• SAM (Small Amount of Material) option : launch a fast printing run with only 100 mL of slurry
  
• Open parameters
• Ceramic printed parts have the same properties as those produced in conventional ways (moulding, machining and injection)