RenAM 500D System | Dual-Laser Metal 3D Printing

RenAM 500D System | Dual-Laser Metal 3D Printing

The RenAM 500D System by Renishaw is a dual-laser metal additive manufacturing solution designed to improve productivity while maintaining high-quality part production. Using laser powder bed fusion (LPBF) technology, it enables manufacturers to produce complex metal components efficiently and supports the transition from conventional single-laser systems to more productive manufacturing processes.

Key Features:

  • Dual-laser technology: Uses two lasers to improve build productivity compared with conventional single-laser systems.
  • High-quality metal 3D printing: Delivers the precision and processing environment associated with the RenAM 500 series.
  • Cost-effective upgrade: Offers an accessible dual-laser option for manufacturers upgrading legacy single-laser equipment.
  • Enhanced productivity: Supports faster build cycles through optimised laser processing.
  • TEMPUS technology option: The RenAM 500D Ultra can use TEMPUS technology to reduce layer processing time and increase productivity.
  • Optimised production workflows: Works with Renishaw’s QuantAM build preparation software to optimise additive manufacturing processes.
  • Industrial applications: Suitable for manufacturers developing complex metal components through laser powder bed fusion.
  • Scalable manufacturing platform: Part of the RenAM 500 series, supporting evolving additive manufacturing requirements.
SKU: RenAM_500D_System Categories: , ,



Description

Advanced Metal Additive Manufacturing Solutions

The RenAM 500 series by Renishaw offers advanced metal additive manufacturing systems designed for precision, productivity, and high-quality component production. Using laser powder bed fusion technology, these systems deliver exceptional accuracy, consistent metallurgical performance, and flexible production capabilities. With a shared 250 × 250 × 350 mm build volume, the RenAM 500 range supports applications from research and material development to high-volume industrial manufacturing.

Improve Manufacturing Productivity with the RenAM 500D System

The RenAM 500D System from Renishaw is a dual-laser metal additive manufacturing solution designed to help manufacturers increase productivity and improve production efficiency. As part of the RenAM 500 series, this advanced laser powder bed fusion (LPBF) system combines precision processing with the advantages of two lasers, making it an attractive option for businesses looking to upgrade from conventional single-laser equipment.

Whether you manufacture complex engineering components or are expanding your metal 3D printing capabilities, the RenAM 500D supports a more productive approach to industrial additive manufacturing.

Dual-Laser Technology for Efficient Metal Printing

The RenAM 500D uses two lasers to process metal powder and build components layer by layer. This dual-laser configuration helps improve manufacturing throughput compared with conventional single-laser systems, depending on component geometry, build strategy, and processing parameters.

By increasing the available laser processing capacity, the system can help manufacturers reduce production bottlenecks and make better use of their additive manufacturing equipment. Its position within the RenAM 500 series also provides access to Renishaw’s established optical, chamber, and gas-flow design.

For businesses moving beyond legacy single-laser systems, the RenAM 500D provides a practical route towards higher productivity without immediately moving to a more complex multi-laser configuration.

TEMPUS Technology for Faster Build Cycles

For applications requiring additional productivity, the RenAM 500D Ultra offers access to Renishaw’s innovative TEMPUS technology. This technology synchronises laser operation with powder recoating, allowing the lasers to fire while the recoater is moving.

By reducing non-productive time between processing steps, TEMPUS technology can save up to nine seconds per layer. Across builds containing thousands of layers, these savings can significantly reduce overall build time. Depending on part geometry and process optimisation, productivity can increase substantially compared with conventional single-laser systems.

When used alongside Renishaw’s QuantAM build preparation software, manufacturers can optimise build strategies and identify opportunities to improve processing efficiency.

Important: TEMPUS technology is associated with the RenAM 500D Ultra configuration and should not be assumed to be included in every RenAM 500D system.

Flexible Production with Renishaw Additive Manufacturing

The RenAM 500D is designed to support industrial metal component manufacturing across a range of applications. Laser powder bed fusion enables the creation of complex geometries that may be difficult or inefficient to produce using conventional manufacturing methods.

Its dual-laser configuration helps businesses balance manufacturing quality, equipment investment, and production throughput. As requirements evolve, the wider RenAM 500 series provides a common platform for organisations developing and expanding their additive manufacturing capabilities.

RenAM 500D System: Technical Specifications

Specification Details
Product name RenAM 500D
Manufacturer Renishaw
Product category Metal additive manufacturing system
Manufacturing technology Laser powder bed fusion (LPBF)
Laser configuration Dual laser
Primary application Industrial metal 3D printing
Main benefit Increased productivity compared with conventional single-laser systems
Optical and chamber design RenAM 500 series platform
Productivity technology TEMPUS technology available on the RenAM 500D Ultra
Build preparation software Renishaw QuantAM
Production focus Efficient metal component manufacturing
Upgrade suitability Manufacturers upgrading from legacy single-laser systems

Note: Confirm the exact build volume, laser power, supported materials, and available options with Renishaw’s official datasheet for the selected configuration.

Upgrade Your Metal Additive Manufacturing Capabilities

The RenAM 500D combines dual-laser processing with Renishaw’s established additive manufacturing platform to help manufacturers improve production efficiency. With the additional productivity potential of TEMPUS technology on the RenAM 500D Ultra, it offers a compelling option for businesses looking to increase throughput and advance their metal 3D printing capabilities.

Explore the RenAM 500D to determine how dual-laser metal additive manufacturing can support your production goals.

Download Data Sheet