Reichert Standard Flow Cell

Reichert Standard Flow Cell

  • Features low volume with extremely fast rise and decay times on both channels
  • It features very small dead volumes
  • Uses standard PEEK™ HPLC/FPLC fittings
  • Compatible with tubing sizes down to 0.0025″ Inner Diameter (65 micrometers)

 

SKU: Standard Flow Cell Category:



Description

Reichert Systems

Reichert’s new Teflon body standard flow cell features low volume with extremely fast rise and decay times on both channels.

This flow cell represents a significant improvement in flow cell performance. As a gasket less flow cell, it features very small dead volumes, low channel volume with extremely fast rise and decay times on both channels.

The flow cell uses standard PEEK™ HPLC/FPLC fittings and is compatible with tubing sizes down to 0.0025″ Inner Diameter (65 micrometers). The mounting mechanism for the flow cell has been completely redesigned.

The flow cell is placed over the sensor slide and locked into place via a mechanical lever. This insures the flow cell is always mounted in a level position with consistent pressure.

Note: This flow cell fits Reichert Instruments manufactured since November 2010. Older instruments may be retrofitted with the new mounting mechanism.